Metal Roofing

Metal roofs being louder than shingle roofs is a myth. The amount of noise in your home during rainstorms is more dependent on your insulation than your roofing material. 

Fun fact: Allen Stoltzfus, owner of Equity Roofing, has a standing-seam metal roof with no attic and has noted no difference in noise level during storms (even with a newborn in the home, the ultimate test!) 

Most projects are completed within a few days, depending on size and complexity.

Metal roofs with quality material, such as high tensile steel, don't usually dent easily. Lower-grade metal or thinner panels, however, are more prone to dents. 

A metal roof alone does not guarantee lower energy bills. Energy efficiency depends far more on insulation, ventilation, and proper installation than on roofing material alone.

That said, certain underlayment systems paired with metal roofing can help reduce attic heat in summer. If your roofer installs a reflective underlayment with an air gap, you could see improved cooling performance in warmer months.

Our article on your roof and heating explains in more detail how your roof and ventilation system impact your energy bill.

Oil canning is a waviness or rippling that can show up in flat metal panels. It is purely cosmetic and does not impact performance. 

Oil canning can be caused by: 

• Thermal Expansion

• Fastening too tightly

• Uneven roof decks

• Thin metal panels

• Dark and shiny paint colors

• Manufacturing issues

Oil-canning is never 100% preventable, but you can take steps to decrease the chances of oil-canning and its appearance. 

We discuss this in detail in our article on oil canning. 

Pro-Z fasteners are high-performance roofing screws designed specifically for exposed-fastener metal roofs. They stand out because:

• They have a full metal cap that shields the gasket from UV damage, which prevents leaks over time.

• The zinc-aluminum alloy cap provides superior rust resistance—no more ugly rust streaks on your roof.

• Each fastener has a built-in stop mechanism to avoid over-driving, a common cause of gasket failure with standard screws.

• They include a 50-year material warranty to protect from rusting and leaks

Pro Appearance metal panels are a type of exposed fastener metal roofing panel designed to give you great curb appeal and long-lasting durability, at a cost that’s much more accessible than premium options like standing seam roofs.

When paired with PRO-Z Fasteners, these panels deliver much of the high-end look and performance of pricier systems, but at a fraction of the cost. They’re a smart choice for homeowners who want the reliability and appearance of metal roofing without stretching the budget.

Equity Roofing uses Pro Appearance panels from Kyfus as one of their preferred options for exposed fastener metal roofs, alongside Tuff-rib panels and PRO-Z fasteners. With this combo, you’ll benefit from a 50-year warranty and a roof that stays sharp and weather-resistant without breaking the ban .

It's possible to install metal right over your existing shingles, provided your roof meets the following requirements:

1. Your existing roof should have only one layer of shingles.

2. The plywood or wood decking beneath the shingles needs to be in good shape (no rot, damage, or sagging).

3. There shouldn't be any moisture problems or structural issues in the attic.

If your roof meets these conditions, installing metal over shingles can save time and mess by avoiding tear-off.

Just keep in mind: any dips or waves in your current roof framing will show through the new metal. Structural problems need to be fixed first. 

Yes, standing seam metal roofs are known to increase a home's value. You can typically expect $2+ back for every $1 spent on standing seam roofing in terms of resale value.